Tiger COUGAR BOOM, Монтаж и эксплуатация

Страница: 66 / 188

JD 7X30 COUGAR Operation Section 3-2
OPERATION
Safety is of primary importance to the owner / operator and to the manufacturer.
The first section of this manual includes a list of Safety Messages, that, if followed, will
help protect the operator and bystanders from injury or death. Many of the messages
will be repeated throughout the manual. The owner / operator / dealer should know
these Safety Messages before assembly and be aware of the hazards of operating this
mower during assembly, use, and maintenance.
The Safety Alert Symbol combined with a signal word, as seen below, is
intended to warn the owner / operator of impending hazards and the degree of injury
possible during operation.
The lowest level of Safety Message; Warns of possible minor injury.
Decals located on the cutter with this Signal Word are Black and Yellow.
Serious injury or possible death! Decals are Black and Orange.
Imminent death / critical injury. Decals are Red and White.
Before any operation of tractor and mower , the user should read and
understand the safety and operating instructions for both the tractor and
the mower. The user should also be familiar with the location and
functions of the units instruments and controls. Being familiar with the
machine and it’s controls will increase efficiency and reduce possibility of
serious injury or damage to the unit. The operator should work slowly and carefully until
he feels comfortable with the machine. Speed and skill will be attained much easier if
the necessary time is spent to familiarize yourself with the machine and its operations.
Since tractor makes and models vary, we recommend reading and following the
operators manual provided by the manufacturer pertaining to your particular unit.
WARNING!
Extreme care should be taken when operating near loose objects such
as gravel, rocks, wire, and other debris. Inspect the area before
mowing. Foreign objects should be removed from the site to prevent
machine damage and/or bodily injury or even death. Any objects that
cannot be removed must be clearly marked and carefully avoided by
the operator. Stop mowing immediately if blades strike a foreign
object. Repair all damage and make certain rotor or blade carrier is
balanced before resuming mowing.
(SGM-5)
WARNING!
Many varied objects, such as wire, cable, rope, or chains, can become
entangled in the operating parts of the mower head. These items could
then swing outside the housing at greater velocities than the blades. Such
a situation is extremely hazardous and could result in serious injury or
even death. Inspect the cutting area for such objects before mowing.
Remove any like object from the site. Never allow the cutting blades to
contact such items.
(SGM-6)