manualshive.com logo in svg

Tiger COUGAR BOOM, Монтаж и эксплуатация

Поделиться
Скачать
Tiger COUGAR BOOM Скачать руководство пользователя страница 12

JD 7X30 COUGAR  Safety Section   1-6

SAFETY

WARNING!

Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts.  Look for loose fasteners,
worn or broken parts, and leaky or loose fittings.  Make sure all pins
are properly secured.  Serious injury may occur from not maintaining
this machine in good working order. 

(SG-21)

WARNING!

Always read carefully and comply fully with the manufacturers instruc-
tions when handling oil, solvents, cleansers, and any other chemical
agent.  

(SG-22)

DANGER!

KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement
and possible serious injury or death.

              (SG-24)

DANGER!

Never allow children to play on or around Tractor or Implement.   Children
can slip or fall off the Equipment and be injured or killed.    Children can
cause the Implement to shift or fall crushing themselves or others.   

(SG-25)

DANGER!

Never run the tractor engine in a closed building or without adequate
ventilation.  The exhaust fumes can be hazardous to your health.

                                

(SG-23)

WARNING!

Never attempt to lubricate, adjust, or remove material from the
Implement while it is in motion or while tractor engine is running.  Make
sure the tractor engine is off before working on the Implement.

                                        (SG-20)

Содержание COUGAR BOOM





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды