Tiger Box 1U4 Assembly Guide
Initial Setup of the Appliance:
25
4.
Press Enter.
The web interface of Tiger Store loads.
5.
Click Manage and enter the following password:
admin
To access the web interface through the Admin port:
Important:
You can access the appliance through the Admin port if such port is
predefined by your vendor.
1.
Set the IP address of the computer on which you will connect to the Admin port to
be on the same network as the preset IP address of the Admin port - 1.21.32.1 (for
Tiger Box appliances shipped before 01 November 2016) or 1.2.3.4 (for Tiger Box
appliances shipped after 01 November 2016).
Important:
Even though your Tiger Box may be keeping the original IP address
(1.21.32.1), should you restore on the appliance a firmware image from a USB
flash drive, which has been sent to you after 01 November 2016, the IP address
of the Admin port will change to 1.2.3.4.
For example, if the Admin port of your appliance uses IP address 1.21.32.1, set the
IP address of your computer to 1.21.32.2 and the subnet mask to 255.255.255.0. If
the Admin port of your appliance uses IP address 1.2.3.4, set the IP address of your
computer to 1.2.3.10 and the subnet mask to 255.255.255.0.
2.
Connect the computer to the Admin port of the appliance.
3.
In a web browser, type the preset IP address of the appliance for the Admin port:
1.21.32.1
or
1.2.3.4
4.
Press Enter.
The web interface of Tiger Store loads.
5.
Click Manage and type the password for the web interface.
Configure Appliance Identification and
Connectivity
Each Tiger Box appliance is identified in the network by IP address and name (by
default, this is the serial number of the appliance).
