Tiger Box 1U4 Assembly Guide
Product Overview: Package Content
4
Package Content
The package you have received weighs approximately 25kg (55 lbs) and has the
following dimensions:
It must contain the following:
•
1 x 1U, 19" rack-mount chassis
•
4 x 3.5" disks each installed in a hot-swappable drive carrier
•
(
optional
) 1 x 3.5spare disk installed in a hot-swappable drive carrier for online
recovery of a failed RAID disk
•
1 x rack-mount rails kit:
•
2 x slide rails
•
8 x screws for attaching the rails to the rack
•
printed instructions for installing the rails
•
2 x power cables
•
1 x 1.80m UTP network cable
•
1 x system restore USB flash drive
Important:
If any of the components listed above is missing from your
shipment, please contact your reseller or Tiger Technology support
immediately.
Important:
Check if both warranty stickers at the back of the chassis are
intact. If a warranty sticker is damaged, immediately contact Tiger
Technology at [email protected]
Hardware Overview
Note:
The pictures used to illustrate the product in this manual may differ from the
Tiger Box appliance you have received depending on the model and firmware version.
Technical Characteristics
Description
Specification
Chassis dimensions
27.59"(D) x 17.2" (W) x 1.71" (H)
700.7 mm (D) x 437 mm (W) x 43.5 mm (H)
Net weight
(without drives installed)
approx. 20kg/44lbs
Gross weight
(with RAID drives installed)
approx. 24kg/53lbs
Power Consumption Max
450 Watts
Power Consumption Idle
120 Watts
Power Supply Unit
High-efficiency 450W, 1 + 1 Redundant Power Supply
with PFC, AC 100~240V Full Range, 50Hz~60Hz
Temperature Range
Operating: 10
º
C~35
º
C (50
º
F~94.9
º
F)
Non-operating: -40
º
C~70
º
C (-40
º
F~158
º
F)
Humidity Range
5% ~85% non-condensing
