1. ATTACHING LEGS TO TABLE TOPS
CAUTION
AT LEAST TWO ADULTS ARE NEEDED TO
COMPLETE THE FOLLOWING STEPS!
1.
Leave top halves #1 in shipping carton as shown
above or lay them on a carpeted floor (
to protect
them from damage and scratches
).
2.
Attach leg assembly #10 to brackets #6 located
on the bottom of the first top half #1. (See above).
Use bolts #27, spacers #20 and locknuts #28.
(See Detail
A
).
NOTE: Be sure brace on leg assembly #10 is
against table.
(See Detail
B
).
Tighten these locknuts snug but
DO NOT
OVERTIGHTEN THEM. JOINT MUST MOVE!
3.
Put caps #21 on bottom end of leg assembly
#10. (See Detail
C
).
4.
Attach upright assembly #11 to remaining
brackets #6 on the bottom of the first top half #1.
(See above). Use bolts #26, spacers #20, and
locknuts #28. (See Detail
D
). Tighten locknuts
snug but
DO NOT OVERTIGHTEN THEM.
JOINT MUST MOVE!
5. With a helper
, set the first top half #1 on its side
against a wall. (
Be sure to put a piece of
cardboard, cloth, or carpeting on the floor first to
protect the top's edges.
) Turn the second top
half #1 over and repeat steps 2-4 to assemble it.
2
