TIG Brush TBX-440, Руководство по эксплуатации, безопасности и техническому обслуживанию

Страница: 11 / 24

11
TBX-440 Instruction Manual
Dec 2015
Ensitech Pty Ltd
www.tigbrush.com
S2 SAFETY PRECAUTIONS
CAUTION
• Fluid spilled on the skin should be washed off as soon
as practical.
• Safety Data Sheet is available for all fluids and should
be read before use.
• The brush gets extremely hot, in excess of 200°C
degrees centigrade. Be very careful touching the brush.
Do not place the brush near any flammable materials.
• The TIG Brush produces an electric current which may
generate small sparks between the brush and the metal
being cleaned.
• Hydrogen gas may also be generated (which is an
invisible but explosive gas). Always use the apparatus
in a well ventilated area. Do not use near flammable
substances, or in areas where dense flammable gases
(such as petrol vapour) may accumulate.
• The TIG Brush TBX-440 uses 240V AC only. Do not use
with any other voltage. If the power cord is damaged
or if the TIG Brush has been dropped from a height and
damaged, do not use the unit. Contact your TIG Brush
supplier to have the TIG Brush inspected
and repaired.
• Do not short out the terminals, or use the TIG Brush with
a damaged wand or cables. Doing so may permanently
damage the TIG Brush and cause damage to the
workpiece being cleaned. The high currents involved
may also cause intense heating of the shorted or
damaged part, which could result in burns to
the operator.
• Ensure that the TIG Brush is located where it cannot
easily fall and cause injury. Ensure that the cables do
not present a trip hazard.