26
4. Keep feeding the filament until the end of the filament sticks out from the other
end of the guiding tube (You can open the top lid, and make sure the filament sticks
out).
Load Support Material (2)
Loading support material the same as loading main. Make sure the material insert
into the correct filament entry. On touchscreen user should choose the correct
support material that match the main material. For PLA, the matching support could
be Tiertime PVA or breakaway. For more info refer to chaper xxx.
---Important!!!---
For Convergence Dual Extruder, both main and support materials must be loaded into the
extruder. Leaving one side of the hotend empty will inevitably results in hotend clogging.
6.3. Slicing
6.3.1 Turn on Extruder 2 for slicing.
1. At Left column click the
“gear” icon to open
the print setting menu.
2. Then click “Basic” button to switch to “Advanced”
mode.
