22
Once selected, the task file will be transferred to the printer. When data transfer is
finished, it will start to heat up and start printing after reaching adequate temperature.
As long as the data transfer is finished, user can disconnect the printer from
computer and printer will able to carry out the print job on its own.
5.2Remove the Printed model
To remove the printed model from the print board of the UP600, it is recommended
to wear gloves for protection. Take out the print board with its front handle, using the
scraper that comes with the machine, scraping the model off the print board from
one corner of the model.
Clean the print board from plastic residues, put back into the build chamber for the
next print.
6. Setup for Dual Extrusion
UP600 has the ability to use Convergence Dual Extruder to print in dual material mode.
The
extruder mount for Single extruders and Convergence Dual are different,
therefore when changing extruder, the extruder mount must be also changed.
