TierTime UP Mini 2 ES, Руководство пользователя

Страница: 51 / 55

Air Flow Adjustment
knob
Printing Techniques
1. Ensure accurate nozzle height. If the nozzle height
value is too low, it will cause warping; if it is too high, it will
crash the nozzle into the platform,causing damage and
clogging. You can manually fine-tune the nozzle height
value in the"Calibation"panels.You can try to adjust the
nozzle height value plus or minus 0.1–0.2mm from the
base on previous results.
2. Calibrate the printing platform well. An unleveled plat-
form usually causes warping. Allow enough time for suffi-
cient preheating. Please usethe3DPrint–Preheatfunc-
tion.A well preheated platform is essential for printing
large objects without warping.
3. The airflow on print head is adjustable, slide the air flow
adjustment knob to change the amount of cooling of print-
ed object.Generally the more cooling provided, the better
the print quality. Cooling also help separate from support
and raft. However cooling also encourage wrapping,
especially for ABS.
To generalize, PLA can take strong cooling without prob-
lem,while ABS should avoid cooling or give little cooling.
For ABS+ medium cooling is recommended.
4. Printing with no raft. It is highly recommended to use
raft for normal printing as it improves adhesion and is
required for leveling compensation. It is turned on by
default, but you can turn it off in the "Print Preference"
panel.
5. Printing with no support. It is possible to print with out
supporting structures.You can turn off support by choos-
ing "No Support" in the "print" setting panel.
49