5
SPECIFICATIONS
MODEL SPECIFICATIONS
MODEL
RESIN
CU FT
CAPACITY
GRAINS
FLOW RATE GPM
MINERAL
TANK SIZE
BRINE
TANK SIZE
SALT CAP
LBS
SHIP
WEIGHT
LBS
SERVICE BACKWASH
WH-HD-IRN-MG-948
1.00 30,000
10.0
2.0
9 X 48
18 X 35
120
120
WH-HD-IRN-MG-1054
1.50 45,000
12.0
4.0
10X54
20 X 37
160
151
•
At the stated service flow rates, the pressure drop through these devices will not exceed 15 psig.
• The manufacturer reserves the right to make product improvements which may deviate from the
specifications and descriptions stated herein, without obligation to change previously manufactured
products or to note the change.
• Do not use water that is microbiologically unsafe without adequate disinfection before or after the
system.
• Iron content must not exceed 5 ppm. Periodic media cleaning is required by Pro-Res cleaner if iron
level exceeds 0.3 ppm. Inlet water which contains measurable levels of chlorine or chloramines may
adversely affect the resin life.
Working Temperature
40-100°F (4-37°C) (Do not subject the unit to freezing temperatures)
Working Pressure
30-125 PSIG (137-861 kPa)
Voltage
120V / 60 Hz
Pipe Size
3/4" or 1"
OPERATING CONDITIONS
SYSTEM DIMENSIONS
MODELS
A (INCHES)
B (INCHES)
WH-HD-IRN-MG-948
57
9
WH-HD-IRN-MG-1054
63
10
4
5
B
Twin Tank Model
A
Models
A (Inches)
B (Inches)
57”
9"
63”
10"
Model
Capacity Grains
Flow Rate
Mineral
Tank
Size
Resin
Cu. Ft.
Brine Tank Size
Inches
Salt
Cap
Lbs
Shipping
Weight
Lbs
@ 15 lbs/cu ft
Factory
Setting
@10 lbs/
cu ft)
@6 lbs/
cu ft
Service
USGPM
Backwash
USGPM
WH-HD-IRN-MG-948
30, 000
26,500
22,000
10.0
2.0
9 x 48 1.00
18.1 X 34. 7
270
1 20
WH-HD-IRN-MG-1054
45, 000
39,750
33,000
12.0
2.4
10 x 54 1.50
18.1 X 34.7
270
151
SPECIFICATION
Working Temperature = 34-110°F (1-43°C)
(Do not subject the unit to freezing temperatures)
Working Pressure = 30-125 PSIG (137-861 kPa)
Voltage = 120V / 60 Hz
Pipe Size = 3/4” or 1”
• At the stated service flow rates, the pressure drop
through these devices will not exceed 15 psig.
• Changing salt settings from factory setting may
require changing injector sizes to achieve stated
capacities
• The manufacturer reserves the right to make product
improvements which may deviate from the
specifications and descriptions stated herein,
without obligation to change previously manufactured
products or to note the change.
* Do not use water that is microbiologically unsafe
without adequate disinfection before or after the
system.
* Iron content must not exceed 1 ppm. Beyond 1 ppm
an iron softener must be used. Periodic media
cleaning is required by Pro-Res Cleaner is iron level
exceed 0.3 ppm
SYSTEM DIMENSIONS
WH-HD-IRN-MG-948
WH-HD-IRN-MG-1054
