4
Codec 10 Step Quick Start Guide
© Tieline Pty. Ltd. 2012
10 Step Connection Quick Start
1. Press the
button and right
navigation button to open the
Input Audio
level adjustment
screen and adjust audio levels.
Press
on the numeric
KEYPAD
to toggle channel 1 on and off and press
to toggle
channel 2 on and off.
Use the up
and down
navigation buttons to select
Gang 1 + 2
and press the
button to toggle ganging on/off.
Use the up
and down
navigation buttons to select a single channel, or ganged
channels. Note: A channel is highlighted when selected.
Use the left and right navigation buttons to adjust the input levels up or down.
2. Press the
HOME
button
to return to the
Home
screen, select
Connect,
then select
IP
and press the
button.
3. Use the
RETURN
button to delete numbers already entered, then use the numeric
KEYPAD
to enter the IP address of the codec you want to dial, using the
or
buttons to
enter the periods in the IP address. Next, press the down
navigation button to select
Config
and press
.
Important Note:
The codec remembers recent IP addresses just like a cell-phone. To
view these addresses press
when you select the
Connect IP
screen. The most recent
addresses and programs are listed first and you can use the navigation buttons to scroll up
and down. Press
to select the address you have highlighted.
4. Navigate to
Alg
(algorithm) and press
.
5. Use the navigation buttons to select an algorithm profile or manually enter algorithm settings,
then press
.
If you decide to manually program the algorithm, use the navigation buttons to select your preferred
algorithm sample rate (if displayed) and bit rate, pressing
after each option is selected.
