TIE DOWN
Safety Products Division
800-241-1806 • 404-344-0000 • www.tiedown.com
E1831, Rev. 10/7/21
4
Hippo Roof Anchor
Installing the Hippo Anchor
Step 1
Sweep area of loose material where
The Hippo Anchor will be placed.
Place 4 counterweights near the
Hippo Base, one on each of the 4
sides.
Tilt each counterweight on its side
and insert the U-bolt from the bottom,
up through one of the two holes in
each base.
Step 2
Position the counterweight/U-bolt
over the Hippo base security tab.
Slide the counterweight/U-bolt down
the security tab until it rest on the
Hippo Base.
Step 3
Repeat Steps 1 & 2 for the remaining
three counterweights.
