MAINTENANCE AND OPERATION MANUAL
TIBC-10 011.1255-00
Tideland Signal Corporation
Page 2 of 14
0111255-00REVA_TIBC-10MANUAL20SEPT11.doc
Factory or field preset
Input protection: .............................................. 10 Amp input circuit breaker (push to reset)
Internal safety backup fuse (not field replaceable)
Output protection: ................................. Constant current limiting with automatic recovery
Internal diode for reverse battery (with 15 Amp, 32 Vdc ATO fuse)
Ambient Operating Temperature: .......................................
−
20 to 55°C Enclosed versions
−
20 t0 70°C Panel version
Storage Temperature: .........................................................................................
−
40 to 85°C
Humidity: ........................................................... 100% RH Condensing, Enclosed versions
20 to 90% RH, Non-condensing, Panel version
Over Temperature Protected: .................................................. Self resetting with hysteresis
Cooling fan set to run at 60°C
Battery Types: ........................................................................................ Flooded Lead Acid
Sealed AGM Lead acid
Gelled Lead Acid
Nickel
Cadmium
Terminal Block Wire Size Range:
AC Mains and Battery Terminal Blocks: ..................... 0.2 mm² to 6 mm² (24 to 10 AWG)
All Other Terminal Blocks: ........................................ 0.08 mm² to 4 mm² (28 to 12 AWG)
Enclosure:
Tideland GMU Version: ...... Stainless steel enclosure with pre-drilled gland holes
Shipped with 2x 20 mm and 2x 25 mm glands
IP-67
See Figure 2 Mounting Dimensions
Explosion Protected Version: ........................ Class I, Div. 1 & 2, Groups B1, C, D
Class I, Zones 1 & 2, Groups IIB+H2, IIA
Class II, Div. 1 & 2, Groups E, F, G
Class III, Div. 1 & 2
NEMA 3, 4, 4X2, 7(B, C, D), 9(E, F, G)
CENELEC/ATEX/IEC
Ex
Ex d IIB + H2 T5 or T6
Ex tD A21 IP66
