Tidal Engineering Synergy Compact, Техническое руководство

Страница: 159 / 346

Synergy Controller Technical Manual, Revision H
Page 159
14.1.3 Logging Commands
The logging system can be setup from the touch screen as described in the previous Logging Setup section
of this application note. In addition, the logging system can also be setup and adjusted remotely, or with
command file (.CFG), or a Bar Code Macro file. The command syntax for the Logging system is as follows:
Command Function Example
CLEARHIST Clear’s the History Log File = clearhist 1
COPYHISTTOFTP 1 Copies the log database to the file “history.txt” in the
Controller’s FTP directory. = copyhisttoftp 1
File: history.txt
COPYHISTTOFTP 3
“name” Copies the log database to the file “name.txt” in the
Controller’s FTP directory. = copyhisttoftp 3 “test”
File: test.txt
COPYHISTTOFTP 7
“name” Copies the log database to the file “name_MM-DD-
YYYY.txt” in the Controller’s FTP directory. = copyhisttoftp 7 “test”
File: test_07-09-2009.txt
COPYHISTTOFTP 15
“name” Copies the log to the file in the controller’s FTP
directory:
“name_MM-DD-YYYY_HH.MM.SS.txt = copyhisttoftp 7 “test”
File: test_07-09-
2009_02.20.05.txt
LOGGING_ENABLED Enables/Disables Interval logging = LOGGING_ENABLED
1
LOGGING_INTERVAL Sets the Logging Interval in seconds = LOGGING_INTERVAL
1
LOG_FILE_SIZE Sets the Log file size in M Bytes. = LOG_FILE_SIZE 1.4
LOG_WHILE_OFF Controls whether the controller continues to log when
the chamber is off = LOG_WHILE_OFF 0
LOG_CHn_ACT Controls whether the controller logs the Channel n
Actual (Process Variable) = LOG_CH1_ACT 1
LOG_CHn_SP Controls whether the controller logs the Channel n
Setpoint = LOG_CH1_SP 1
LOG_DEVALMS_CHn Controls whether the controller logs the Channel n
Deviation Alarms = LOG_DEVALMS_CH1
1
LOG_CHn_HEAT Controls whether the controller logs the Channel n
Heat output = LOG_CH1_HEAT 1
LOG_CHn_COOL Controls whether the controller logs the Channel n Cool
output = LOG_CH1_COOL 1
LOG_CH1_HEAT_PB Controls whether the controller logs the Channel n
Heat Proportional Band constant = LOG_CH1_HEAT_PB
1
LOG_CH1_COOL_PB Controls whether the controller logs the Channel n Cool
Proportional Band constant. = LOG_CH1_COOL_PB
1
LOG_LOW_n Controls whether the controller logs the nth Low Res
Analog Input. = LOG_MACHINE1 0
LOG_UUTn Controls whether the controller logs the nth UUT
Module. = LOG_UUT1 0
LOG_HIGH_n Controls whether the controller logs the nth High
Resolution Analog Input. = LOG_HIGH_1 0
LOG_TCn Controls whether the controller logs the nth
Thermocouple Input. = LOG_TC1 1
LOG_TCnCJ Controls whether the controller logs the nth
Thermocouple Cold Junction sensor. = LOG_TC1CJ 0
LOG_OUTPUTS Controls whether the controller logs the Outputs = LOG_OUTPUTS 1
LOG_DIO_n Controls whether the controller logs Digital Input n = LOG_OUTPUTS