E
E
x
x
t
t
e
e
r
r
i
i
o
o
r
r
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
…
…
Before you begin the installation of your new TIC outdoor product, please
carefully select the locations of your new TIC products noting any impediments
or obstacles in the wiring path(s).
In general;
1. Select a reasonably clean, reasonably structurally sound surface for
the mounting and installation of your new TIC outdoor patio speakers.
This will prevent movement or excessive vibration during use. This will
also ensure more uniform sound dispersion.
2. Ensure your new TIC outdoor speaker cables or power source if
required, can easily reach your new speakers. Ensuring that there are
no obstructions or difficulties such as concrete paths or architectural
feature(s) impediments. If the cable is surface mounted you must make
sure the cable is placed where it cannot be tripped over, pulled,
abraded, pierced or crushed.
3. Wherever possible avoid long term exposure of your new TIC outdoor
speakers to chlorinated solvents, acids such as those often contained
in fertilizers and other solvents which have the potential to eventually
wear the speaker components prematurely.
4.
When installing either burial cable or TIC’s in-ground outdoor speakers
please be very aware of any existing in-wall cable, submerged
plumbing, piping such as sprinklers or irrigation pipes and any sub-
surface wiring already in place.
Carefully unpack and check all components
Run speaker test prior to exterior use or installation
