Tiara Yachts C49 Скачать руководство пользователя | Manualshive

Страница: 83 / 152

background image

Safety Information

Section 9

9-3

43 LS

43 LS

WARNING

!

FIRE/EXPLOSION HAZARD

The gas of the fire extinguisher sys

-

tem displaces oxygen to “smother”

the fire. DO NOT open the hatch. Oxy

-

gen can feed a fire and flashback can

occur, which can cause death or seri-

ous injury. If the onboard fire system

discharges, wait at least 15 minutes
before opening engine hatch.

The manual discharge pin is located below
the center helm seat, on the forward face of
the seat box.

To manually discharge the fire

suppression system, remove the pin and pull
the red handle.

Fire system manual discharge pull

The system is equipped with an engine shut-
down circuit to automatically shut down the

generator. The red light on the Fireboy status

indicator (on the helm) will light and an alarm
will sound if this should occur. Shut down all
engines immediately. Turn off all electrical
systems and powered ventilation, and extin-

guish all smoking materials. DO NOT open

the engine compartment hatch, because

this will feed oxygen to the fire and allow a
flashback to occur. Allow the extinguishing

agent to soak the generator compartment for
at least 15 minutes and wait for hot metals
or fuels to cool before inspecting for cause

or damage. Have an approved portable fire

extinguisher at hand and ready for use and

DO NOT breathe fumes or vapors caused by
the fire.

After the fire suppression system discharges,

turn on the

BLOWER switch at the helm

and

operate the generator blower for five minutes.

Open the mechanical space to evacuate the

fire suppression agent and find and fix the

problem.

To restart the engines, press the override
button on the helm-mounted

Fireboy system

status indicator. Refer to the system owners

manual for more information.

Fire system status indicator and override

button

Bilge And Fuel Fires

Fuel compartment and bilge fires or explo

-

sions are dangerous because of the presence

of fuel. You must make the decision to fight
the fire or abandon the boat. If the fire cannot

be extinguished quickly or it is too intense to

fight, abandoning the boat may be your only

option. You must consider your safety, the
safety of your passengers, the intensity of

the fire, and the possibility of an explosion in

your decision.

If you find yourself in this situation, make sure

all passengers have a life preserver, go over
the side, and swim well upwind of the boat, to
keep clear of any burning fuel that could be
released and spread on the water as the boat
burns or in the event of an explosion. When
clear of the danger, check and account for all

passengers who were onboard. Give what

-

ever assistance you can to anyone in need or
in the water without a buoyant device. Keep
everyone together for morale and to aid res-
cue operations.

«
...
81
82
83
84
85
...
»

Содержание C49

























































































































































Отзывы:

Нет отзывов

Похожие инструкции для C49

Бренд: komodo Страницы: 12

Бренд: Coaster Страницы: 39

Бренд: Shumway Marine Страницы: 18

Бренд: Pelican Страницы: 14

Бренд: J/Boats Страницы: 66

Бренд: 3D Tender Страницы: 23

Бренд: Sailfish Страницы: 68

Hard Fabric Line

Бренд: SEVEN BASS DESIGN Страницы: 4

Бренд: NW Explorations Страницы: 61

Бренд: NW Explorations Страницы: 72

Бренд: Rinker Страницы: 65

Бренд: Rinker Страницы: 89

Бренд: Northern Diver Страницы: 6

Бренд: Mistral Страницы: 54

Бренд: Mistral Страницы: 85

Fish n Chips 460 GL 2019

Бренд: Dufour Страницы: 20

Бренд: Dufour Yachts Страницы: 65

Бренд: Dufour Yachts Страницы: 73

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды