Steps
1. Drill holes according to the hole position chart and plug the expansion bolts into
the holes.
2. Take the camera out of box and take down the cover, and then fix the dome onto
the ceiling.
3. Loosen the regulating screws to adjust camera lens to a right direction and
tighten the screws again.
4. Put the dome cover back.
Note: The surface to install camera should be strong enough to bear camera.
4.2.5 IP Vandal-proof Dome Camera
Pic 4.2.5 IP Vandal-proof dome camera installation
Steps
1. Drill holes according to the hole position chart and plug the expansion bolts into
the holes.
2. Take the camera out of box and take down the cover, and then fix the dome onto
the ceiling.
3. Loosen the regulating screws to adjust camera lens to a right direction and
tighten the screws again.
4. Put the dome cover back.
5. Tear off the film on the cover. (Pay attention to protect the cover in case of dirt
and scratch)
Note: The surface to install camera should be strong enough to bear camera.
Содержание 1.3MP Mini Bullet
