V.
USING YOUR tia
•
Install battery
o
Pull out gently but firmly on battery compartment cover on front of
unit near trigger (Note that the cover remains attached by a hinge at
the base of the handgrip.
o
Attach standard 9V battery to connectors as shown inside the
compartment
o
Nest battery inside the compartment
o
Close compartment
•
Before first use or after changing the battery, wait 5-10 minutes for the
device to warm up
•
Push back hair from the forehead
•
Wipe away any perspiration
•
Avoid drafts (e.g. vents, another person’s breath, etc.)
•
If a temperature change of the environment occurs, allow your tia NC-
9900 to reach current room temperature (about 15 – 20 minutes) before
using
•
Aim toward the forehead from 2 - 6 inches (5 -15cm) away.
•
Press the trigger button and temperature is displayed in half a second.
•
Note: temperature may also be taken from behind the earlobe.
•
Allow at least 15 seconds (1 minute is recommended) between
measurements
VI. SETTINGS
* During any setting functions, if your unit times out and goes
back to its resting state, simply press the trigger and begin
again.
1. Choosing Celsius or Fahrenheit as your Unit of Measure
•
Press trigger to activate unit
•
Select degrees Celsius by pressing the “°C” button, or degrees
Fahrenheit by pressing the “°F” button
•
Wait several seconds
•
Press trigger again to confirm selection and exit
6. Fahrenheit
7. Memory
8. Celsius
9. Laser & backlight on/off
