6. Date setting
•
Press trigger to activate unit
•
Press and hold ∆ button for approximately 3 seconds to display year
•
Press “°C” button to advance one year
•
Press “°F” button to go back one year
•
Press ∆ button to change to month
•
Press “°C” button to advance one month
•
Press “°F” button to go back one month
•
Press ∆ button to change to day
•
Press “°C” button to advance one day
•
Press “°F” button to go back one day
•
Press trigger to accept changes and exit
7. Data Memory
•
Press trigger to activate unit
•
Press “M” button and then “°C” button to display the most recent
•
Press “M” button and then “°C” button to display the next most recent
•
Press “M” button and then “°C” button to display the third most recent
•
Continue to press “M” button and then “°C” button to view up to the 32
previous readings
•
Note: Display shows a count up from 1 to 32 in between
temperature displays; To view a count down from the 32
nd
reading
down to the most recent follow the same procedure as above, but
press the “°F” button instead of the “°C” button
•
To clear memory press and hold “M” button for approximately 3 seconds
•
Press trigger to exit
7. Whenever you are in a setting mode you may exit by pressing the
trigger
8. Battery changing
When the LCD screen displays ‘
+
’ your battery is depleted and needs to be
replaced
To replace battery
o
Pull out gently but firmly on battery compartment cover on front of
unit near trigger (Note that the over remains attached by a hinge at
the base of the handgrip)
o
Remove the spent battery from the connectors and discard
appropriately
o
Attach replacement standard 9-volt battery to connectors as shown
