Ti Lite TR Series 1 Скачать руководство пользователя страница 67

Страница: 67 / 122

6-5

TR/YR Owners Manual

OM_TR_0712RevC

CHAPTER 6: SIDE GUARDS

Figure 6-6

Fold-Down Side Guards

Allen Screws

Clamp

Washers

Removing

Tools Needed:

• 3/16” Allen Wrench

1. Remove the two Allen screws that secure the two halves of the side guard clamp. See Figure 6-6.

2. Remove the Fold-Down Side Guard clamp assembly.

Reinstalling

Tools Needed:

• 3/16” Allen Wrench

1. Align the two halves of the side guard clamp around the seat tube of the frame. See Figure 6-6.

2. Insert the two Allen screws through the washers and the two halves of the clamp and securely tighten.

Fendered Carbon Fiber Side Guard

Using Fendered Side Guards

Note:

Do not allow any portion of the clamp to extend

passed either end of the frame rail located under the seat

tube.

To remove the Fendered Side Guard, lift the side guard

out of the side guard mount. To replace, place the bracket

into the slot between the side guard mount and the clamp.

Make sure the rearward end of the side guard is inside the

stabilizer tab. See Figure 6-7.

To adjust the Fendered Side Guards, see “Adjusting (TR

and YR Series 2)” on page 6-2 or “Adjusting (TR Series 3)”

on page 6-3.

Figure 6-7

Fendered Carbon Fiber Side Guard

Clamp

Side Guard

Mount

Stabilizer

Tab

Bracket

Содержание TR Series 1



























































































































Результаты поиска

Содержание TR Series 1

Отзывы:

Ti Lite TR Series 1, Руководство пользователя, Страница: 67 / 122

Результаты поиска

Содержание TR Series 1

Отзывы: