Ti Lite TR Series 1 Скачать руководство пользователя страница 66

Страница: 66 / 122

6-4

TR/YR Owners Manual

OM_TR_0712RevC

CHAPTER 6: SIDE GUARDS

Fold-Down Rigid Side Guards

(Aluminum and Carbon Fiber)

(TR and YR Series 2)

Using Fold-Down Side Guards

To fold down, simply remove the seat cushion and push the top of the side guard toward the seat sling. To unfold,

simply pull the side guard up away from the seat sling. See Figure 6-5.

Figure 6-5

Fold-Down Side Guards

Allen

Screws

Clamp

Dowel

Removing

Tools Needed:

• 3/16” Allen Wrench

1. Remove the two Allen screws that secure the two halves of the side guard clamp. See Figure 6-5.

2. Remove the Fold-Down Side Guard clamp assembly.

Reinstalling

Tools Needed:

• 3/16” Allen Wrench

1. Align the two halves of the side guard clamp around the seat tube of the frame. See Figure 6-5.

Note:

The half of the side guard clamp to which the side guard mount is attached has a dowel pin protruding from

the clamp that must be inserted in the side guard clamp hole in the frame.

2. Insert the two Allen screws through the washers and the two halves of the clamp and securely tighten.

Fold-Down Rigid Side Guards

(Aluminum and Carbon Fiber)

(TR Series 3)

Note:

Do not allow any portion of the clamp to extend passed either end of the frame rail located under the seat tube.

Using Fold-Down Side Guards

To fold down, simply remove the seat cushion and push the top of the side guard toward the seat sling. To unfold,

simply pull the side guard up away from the seat sling. See Figure 6-6.

Содержание TR Series 1



























































































































Результаты поиска

Содержание TR Series 1

Отзывы:

Похожие инструкции для TR Series 1

Бренды по названию

Популярные бренды

Ti Lite TR Series 1, Руководство пользователя

Результаты поиска

Содержание TR Series 1

Отзывы:

Похожие инструкции для TR Series 1

Бренды по названию

Популярные бренды