O
PERATING
M
ANUAL
3.
T
RANSPORTATION
ThyssenKrupp Aufzugswerke GmbH
3.
Transportation and storage
Packaging:
Shipping takes place depending on the order and drive (transport pallet,
transport frame, machine base frame), optionally covered with foil.
Other packaging types can deviate from this on a country-specific basis
(air / sea /truck freight).
Transportation:
Transportation shall be subject to observation of the
safety requirements
and the gravity centre of machine and frame.
Transportation:
Transportation shall be subject to observation of the
safety requirements
and the gravity centre of machine and frame.
Transportation by means of fork lift:
•
In the case of transportation by means of fork lift see to it that adequately
long forks are used to prevent the transported component from turning
over.
•
See to it that the fork is attached to the pallet and not to the machine.
•
Pay attention to projecting parts! There is the risk of injury to persons or
damage to property!
Transportation by means of crane:
•
Do not stay below suspended loads!
•
Fasten transport chains or ropes in the 4 holes drilled in the corners of the
machine frame.
•
Do not lift up the casing!
•
Remove transport aids after transportation.
Note the pictographs fastened on the packing or on other visible places.
Top
Handle with care
Keep dry
Do not expose to
heat
Do not use hand-
held grippers
Fasten here
27
Version 02/2009
DAF330
