Thyracont VSH88D, Руководство по эксплуатации

Страница: 31 / 56

31
vsh-de-130326
2 Vacuum Transducer VSH
2.1 For Orientation
This operating instructions describe installation and operation of products with
article numbers
VSH88D, VSH88DL,
VSH89D and VSH89DL.
The article number can be found on the product's type label. Technical
modifications are reserved without prior notification.
2.2 Delivery Content
Included in the delivery consignment are:
- Transducer VSH
- Protective sensor screen
- Protective flange cover
-
Operating instructions
Available Accessories:
-
Measurement cable 2m for VD9 display unit, W1506002
- Measurement cable 6m for VD9 display unit, W1506006
-
Measurement cable 2m for VD10/VD12 display unit, W1515002
- Measurement cable 6m for VD10/VD12 display unit, W1515006
-
Counterplug 15pole, XB1500002
2.3 Product Description
The VSH vacuum transducer measures absolute pressure in the range of
1000 - 5.0x10
-10
mbar. The transducer can be connected to Thyracont display
and control units or to customer related power supply and evaluation units in
compliance with pin assignment. The analog output signal 1.219V - 8.6V has a
logarithmic dependence on pressure over the whole range.
In addition the device has a serial RS485 interface for digital data transfer (see
chapter 4.2).
The transducer is equipped with a metal-sealed combination sensor type Pirani /
Hot Cathode (Bayard Alpert) and temperature compensated. It can be mounted
to suitable flange connectors.