Thwaites SPRITE NIMBUS, Руководство пользователя

Страница: 24 / 54

4. Remove any inclusions from stretcher holes and rectify any damage on edges of
holes in order that the carrier stretcher tool will fit correctly.
5. Check turn buckle on carrier stretcher tool is free and fit tool to carrier ensuring that
pegs locate fully in stretcher hole.
6. Checking that no foul condition exists, rotate turn buckle by spanner in order to
stretch carrier.
IMPORTANT - DO NOT STRETCH CARRIER MORE THAN .010" - .012" MEASURED
ACROSS STRETCHER HOLE.
NOTE: Open turn buckle nut using spanner. IMPORTANT - Do not overstretch -See
instructions.
7. Remove differential assembly complete with ring gear. It may be necessary to lever
the case out of the carrier. In order to prevent damage, do not lever against
stretcher or carrier, but use packing.
8. Ease off turn buckle and remove spreader.
TO REMOVE GEAR & BEARINGS FROM DIFFERENTIAL CASE;
9. Remove ring gear from case assembly if necessary.
10. Remove bearing cones from differential case trunnion diameter if necessary.
11. Dis-assemble differential in accordance with appropriate sheet.
REMOVAL OF PINION
12. Prevent rotation of companion flange (item 31) by using service tool having pegs
locating in flange bolt holes. Remove the locknut (item 33) and washer (item 32)
3-2-1