Certification/Compliance/Warranty I Page 1
EN
BI
DE
ES
FR
IT
PT
TR
P
ɭɫɫɤɢɣ
SAR Information
Your wireless Thuraya XT-PRO phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the limits for exposure to
radio frequency (RF) recommended by international guidelines (ICNIRP).
These limits are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines include
a substantial safety margin designed to assure the safety of all persons,
regardless of age and health. The exposure guidelines for mobile devices
employ a unit of measurement known as the Specific Absorption Rate or
SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/
kg) averaged over ten grams of tissue. Tests for SAR are conducted using
standard operating positions with the device transmitting at its highest
certified power level in all tested frequency bands. The actual SAR level
of an operating device can be below the maximum value because the
device is designed to use only the power required to reach the network.
That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value under the
ICNIRP guidelines for use of the device at the ear and body value is 0.415W/
kg and 0.627W/kg. Use of device accessories and enhancements may
result in different SAR values. SAR values may vary depending on national
reporting and testing requirements and the network band. Additional SAR
information may be provided under product information at www.apsi.
co.kr. Although not intended to support operations when body-worn (in
this position the phone cannot properly receive and transmit the satellite
signal therefore in this mode of operation is not practical) the use of body-
worn accessories is limited to belt-clips, holsters, or similar accessories that
have no metallic component in the assembly and which provide at least
1cm separation between the device, including its antenna, and your body.
FCC Compliance
Your mobile device is also designed to meet the requirements for
exposure to radio waves established by the Federal Communications
Commission (USA) and Industry Canada. These requirements set a SAR
limit of 1.6W/kg averaged over one gram of tissue and the Thuraya
XT-PRO complies with these requirements. Although not intended
to support operations when body-worn (in this position the phone
cannot properly receive and transmit the satellite signal therefore in this
mode of operation is not practical) the use of body-worn accessories is
limited to belt-clips, holsters, or similar accessories that have no metallic
component in the assembly and which provide at least 1cm separation
between the device, including its antenna, and your body. It is not
possible to acquire an FCC ID because of existing FCC regulation 25.129
(d), but the product has passed all FCC standard tests. XT-PRO also
complies with FCC SAR standards. The SAR value (head) of the Thuraya
XT-PRO is 0.731W/kg.
This equipment generates or uses radio frequency energy.
Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved
in the instruction manual.The user could lose the authority
to operate this equipment if an unauthorized change or
modification is made.
Caution
Certification / Compliance / Warranty
