9
•
Connect the 1m coax cable from the Power Supply, AS03951 to Thuraya IP
terminal “active external antenna” connector (see Figure 4). The Thuraya IP
terminal will automatically detect and use the SpaceCom IP221 Vehicle Antenna.
Figure 4. Connecting the SpaceCom IP221 Vehicle Antenna to the “active external
antenna” connector on the Thuraya IP terminal.
•
The DC cable of the Power Supply, AS03951 is connected to a nominal power
supply with specifications defined in Section 3. Please ensure that the polarity is
correct. The DC step-up converter in the Power Supply, AS03951 is isolated from
the vehicles ground.
•
The external GPS antenna, Thuraya IP power supply must be connected according
to the Thuraya IP user manual.
•
Bending Radius of the Coax Cables
Please observe the minimum bending radius for the 2 types of coax cables.
Warranty will be void if guidelines are not followed.
Cable Type
Bending Radius
4m and 1m RG223
Single bend: 25mm
Multiple bends: 50mm
