Thuraya SO-2510, Руководство пользователя

Страница: 15 / 18

18
02
Getting started
19
02
Getting started
03
04
Getting started
01
Silent a call
If the ringtone of your phone is inconvenient, it can be turned off
by using silent.
1. Press .
Note
Sound volume during call can be increased/decreased by using
and other sound volumes can be changed by using the
sound setting menu.
●
High-Penetration Alerting
You cannot receive an incoming call if the SAT signal to your
mobile phone is not good enough. In this situation, a message
box with “SAT Call Find Improved Reception” and a special
ringtone will be displayed on the screen, and signal on indicator
line changes to HPA signal.
You cannot receive calls in High-Penetration
Alerting mode.
You must move to a place of better SAT
signal to receive calls.
Otherwise, you can use reject or ringtone off.
To receive calls in HPA mode:
1. Move to a place with an improved signal .
2. Fully extend the antenna of SO-2510.
3. Point SO-2510 roughly towards satellites.
4. While watching signal on indicator, as soon as signal strength
is strong enough the warnings disappear from the display.
Now you can accept the call as usual by using the key.
Option during a call
Iincoming call:
When User1 is receiving a call from User3, while talking with
User2, User1 can ‘accept; or ‘reject’ the call from Uesr3. If the
call is rejected, the conversation between User1 and User2 is not
affected. If the call is accepted, User2 is put on hold and User1 is
connected to the call from User3. Using the option menu, User1
can swap over User2 and User3, or operate a multi-party call up
to 6 users including User1.
Outgoing call:
If User1 wants to make a call to User3, while talking with User2,
using the option menu puts User2 on hold and enters Ueser3’s
phone number. To include User2 in the conversation with User3,
select a multiparty call on the option menu.
User2 and User3 can be swapped over. Up to 6 users including
User1 can have a conversation simultaneously.
New Message
To enter Name, Message and Memo, follow the below
procedures.
In order to facilitate fast operation, the Select mode and Enter
mode are separated with SO-2510. In the Select mode, entry
cannot be made with keypad but can be made by using the Edit
mode.
Select mode
Focus can be moved using navigation key,
and entry cannot be made in general text
box except number entry. When text entry is
possible, is displayed on softkey line.
That is, to enter name in select mode,
should be pressed to move into edit mode.
Edit mode
Desired characters can be entered. In edit
mode, navigation key can be used to put
space at the end of text row, as well as to
move cursor.
Text composition is restricted for each item,
20 Latin characters for name and 100 Latin
characters for schedule.