402.435.4249 www.THUNDERSTONEMFG.com Page 3
Keypad Controller Operation - Wireless Operation
Remote functions also listed on decal under lid of remote.
1.
To power ON the EZ Flow system using the remote.
a.
Open the remote lid and press the “Mode” button two times then wait two seconds for remote
to toggle to the “Front Hopper” mode (First two lights flashing).
b.
Press and hold the “On/Open” and “Off/Closed” buttons on the remote simultaneously for 5
seconds or until the blue keypad controller light comes on to indicate the system is activated.
2.
To use the front hopper doors.
a.
Open the remote lid and press the “Mode” button two times then wait two seconds for remote
to toggle to the “Front Hopper” mode (First two lights flashing).
b.
Press either “On/Open” or “Off/Closed” buttons to perform the desired operation.
3.
To use the rear hopper doors.
a.
Open the remote lid and press the “Mode” button three times then wait two seconds for
remote to toggle to the “Rear Hopper” mode (First three lights flashing).
b.
Press either “On/Open” or “Off/Closed” buttons to perform the desired operation.
4.
To power OFF the EZ Flow system using the remote.
a.
Open the remote lid and press the “Mode” button two times then wait two seconds for remote
to toggle to the “Front Hopper” mode (First two lights flashing).
b.
Press and hold the “On/Open” and “Off/Closed” buttons on the remote simultaneously for 5
seconds or until the blue light turns off to indicate the system is deactivated.
5.
To control optional work lights.
a.
Open the remote lid and press the “Mode” button four or five times depending on which work
light you want to control then wait two seconds for remote to toggle to the “Work Light” mode
(First four or five lights flashing).
b.
Press desired button to perform the required
operations. On/Off.
Mode Selection
Button
MODE Lights
On/Open Button
Off/Closed
Button
