Thunderobot ST PLUS, Руководство пользователя

Страница: 7 / 22

7 ST PLUS
ENGLISH
ENGLISH ST PLUS 7
Polymer Battery Precautions
Note the following information which is
specific to poly- mer batteries only, and where
applicable, this overrides the general battery
precaution information.
• Polymer batteries may experience a slight
expansion or swelling, however this is part
of the battery’s safety mechanism and is not
a cause for concern.
• Use proper handling procedures when using
polymer batteries. Do not use polymer
batteries in high ambient temperature envi-
ronments, and do not store
unused batteries for extended periods.
Cleaning
• Use a soft clean cloth to clean the computer,
but do not apply cleaner directly to the
computer.
• Do not use volatile (petroleum distillates) or
abrasive cleaners on any part of the
computer.
• (For Computer Models Supplied with Light
Blue Cleaning Cloth) Some computer models
in this series come supplied with a light blue
cleaning cloth. To clean the computer case
with this cloth follow the instructions below.
• Power off the computer and peripherals.
• Disconnect the AC/DC adapter from the
computer.
• Use a little water to dampen the cloth
slightly.
• Clean the computer case with the cloth.
• Dry the computer with a dry cloth, or allow it
time to dry before turning on.
• Reconnect the AC/DC adapter and turn the
computer on.
Battery Disposal & Caution
The product that you have purchased contains a
rechargeable battery.
The battery is recyclable.
At the end of its useful life, under various state and
local laws, it may be illegal to dispose of this battery
into the municipal waste stream. Check with your
local solid waste officials for details in your area for
recycling options or proper disposal.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type re-
commended by the manufacturer.
Discard used battery according to the manufactu-
rer’s instructions.
Servicing
Attempting to service the computer yourself
may violate your warranty and expose you
and the computer to electric shock. Refer
all servicing to qualified service personnel,
particularly under any of the following
conditions:
• When the power cord or AC/DC adapter is
damaged or frayed. • If the computer
has been exposed to any liquids.
• If the computer does not work normally when
you follow the operating instructions.
• If the computer has been dropped or
damaged (do not touch the
poisonous liquid if the LCD panel breaks).
• If there is an unusual odor, heat or smoke
coming from your computer.
System Startup
1
. Remove all packing materials.
2 . Place the computer on a stable surface.
3
. Insert the battery and make sure it is locked
in position.
4
. Securely attach any peripherals you want
to use with the computer (e.g. keyboard and
mouse) to their ports.
5 . Attach the AC/DC adapter to the DC-In jack
on the left of the computer, then plug
the AC power cord into an outlet, and connect
the AC power cord to the AC/DC
adapter ( make sure you use the adapter
when first setting up the computer, as to
safeguard the computer
during shipping the
battery will be locked to not power the system
until first connected to the AC/DC adapter).
6 . Use one hand to raise the lid/LCD to a
comfortable viewing angle (do not exceed
130 degrees); use the other hand (as
illustrated in Figure 1 ) to support the base of
the computer ( Note: Never lift the computer
by the lid/LCD).
7 . Press the power button to turn the computer
“on”.
Shut Down
Note that you should always shut your computer
down by choosing the Shut down command in Win-
dows (see below). This will help prevent hard disk or
system problems.
1. Click the Start Menu
icon .
2. Click the
Power
item .
3. Choose
Shut Down
from the menu.
Figure 1
Opening the Lid/LCD/ Computer with AC/DC
Adapter Plugged-In
System Software
Your computer may already come with system
software pre-installed. Where this is not the
case, or where you are re-configuring your
computer for a different system, you will find
this manual refers to
Microsoft Windows 10.