81
WEB BROWSER-BASED CONFIGURATION
values can be selected from 0.4 to 6 seconds per step which
powers up one drive.
•
Time to Hdd Low Power Idle
This option delivers lower power consumption by automati-
cally unloading recording heads during the setting idle time.
The values can be selected “Disabled” or within the range 2 to
7 minutes.
•
Time To Hdd Low RPM Mode
This function can automatically spin disks at lower RPM if
there have not been used during the setting idle time. The
values can be selected “Disabled” or within the range 10 to 60
minutes.
•
Time To Spin Down Idle HDD
This function can automatically spin down the drive if it hasn’t
been accessed for a certain amount of time. This value is used
by the drive to determine how long to wait (with no disk activ-
ity, before turning off the spindle motor to save power). The
values can be selected “Disabled” or within the range 1 to 60
minutes.
•
SATA Power Up In Standby
SATA Power Up In Standby (power management 2 mode,
PM2) is a SATA disk drive configuration which prevents the
drive from automatic spinup when power is applied. “Enabled”
option allows the drive to be powered-up into the Standby
power management state to minimize inrush current at
power-up and to allow the controller to sequence the spinup
of devices. It is mainly for server/workstation environments
operating in multiple-drive configurations.
4.8.4 Ethernet Configuration
Use this feature to set the controller Ethernet port configuration.
A customer doesn’t need to create a reserved space on the arrays
before the Ethernet port and HTTP service are working. The firm
-
ware-embedded web browser-based RAID manager can access it
from any standard internet browser or from any host computer
either directly connected or via a LAN or WAN with no software or
