manualshive.com logo in svg

Thunderbolt ARC-8050T2, Руководство пользователя

Поделиться
Скачать
Thunderbolt ARC-8050T2 Скачать руководство пользователя страница 71

71

WEB BROWSER-BASED CONFIGURATION

Followings are considered as “Removed-Disk”:

1. Manually removed by user.

2. Losing PHY connection due to bad connector, cable, backplane.

3. Losing PHY connection due to disk fail.

Basically, in the eyes of the controller, the disk suddenly disap-

pears due to whatever reason.

4.7.8 Identify Enclosure

To prevent removing the wrong enclosure, the selected Areca ex-

pander enclosure all disks fault LED indicator will light for physi-

cally locating the selected enclosure when the “Identify Enclo-

sure” is selected. This function will also light the enclosure LED 

indicator, if it is existed.

4.7.9 Identify Drive

To prevent removing the wrong drive, the selected disk fault

LED indicator will light for physically locating the selected disk

when the “Identify Selected Device” is selected.

Содержание ARC-8050T2




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды