Thunder TDR02026 Скачать руководство пользователя страница 8

8

DISPLAY

The top left icon shows current flow when the unit is charging the auxiliary battery and 

will be blue when any of the charging modes are charging the auxiliary battery. The 

top left icon will only turn green when solar input is charging the starting battery as 

seen in the image below.
The centre top of the LCD screen shows the selected Ah of the connected auxiliary 

battery, this must be adjusted pressing the “AH select” button on the bottom left 

corner of the LCD touch screen. The AH value increments by 5 Ah every time “AH 

select” is pressed.
The top right icon shows output current from anything connected through the shunt.
The oval shape progress bar on the middle of right side of the screen will show the 

time remaining until auxiliary battery is depleted along with the remaining hours before 

the connected auxiliary battery is depleted,(only when the shunt is connected) and 

also the percentage charged  left for the auxiliary battery.
The symbols on the middle of left side will indicate which charging process is 

currently activated, and will have the orange/red ring surrounding the current charging 

mode. If the current charging mode is 240VAC, and is switching to solar, the solar 

symbol will rotate to the top to indicate the current charging mode.
The voltage value shown in the middle of the screen (right next to current charging 

mode) is only for the auxiliary battery voltage.
The bottom right corner will only display a faulty battery icon if the auxiliary battery is 

detected to be faulty during stage 5.
The icon on the middle of bottom of the screen shows whether lithium battery 

charging has been activated or not and will only be displayed when the blue Lithium 

charging wire has been connected. 

Display unit parameters:

Input current displays: 0-30A
Output load current displays: 0-200A
Output voltage displays: 0-16V (Auxiliary Battery)
Auxiliary Battery Ah selected displays: 40-500 Ah (Each click increases 5Ah)
Auxiliary Battery percentage displays: 0-100%
Auxiliary Battery remaining lifetime: 0-100 hours

80

%

5

A

13.5

V

35

A

60

HR

100

AH

A/H

LITHIUM

AH SELECT

LITHIUM

BATTERY

FAULTY

BATTERY

80

%

5

A

13.5

V

35

A

60

HR

100

AH

A/H

LITHIUM

AH SELECT

LITHIUM

BATTERY

FAULTY

BATTERY

LCD screen with input charging icon turned 
green when charging starting battery and will 
turn blue when charging auxiliary battery.

Содержание TDR02026













Отзывы: