-07-
INTRODUCTION
The GHOST+ is an all in one, ready to fly quadcopter designed for aerial photography.Before shipping from the factory,
it has been configured and fully tested. It means you just need a few assembly steps as shown below, then you can
enjoy your flight.
LANDING SKID
For SAFETY reason, it is advised that you watch the tutorial videos and this manual completely before flying the
quadcopter.
CAUTION
!
More information can view the tutorial videos on our TTR official website (www.ttrobotix.com) or YouTube channel
(https://www.youtube.com/user/ThunderTigerVideo)
QUICK START GUIDE
Install left and right
side the same way
1. Make sure skid assembled as shown.
2. Make sure hex bolt head fit into the
hex shape hole properly.
2
1
Install the landing skid into the body as
shown and secure screws tightly.
