28
FIRMWARE UPDATES
The TP1430C is equipped with a standard mini USB connector that allows the firmware to be updated
by the user. Any future updated firmware versions including improved functions, additional features,
possible new battery chemistry support and more can be downloaded for free from the
Support/Downloads section of the web site at
Additional information/instructions regarding how to download the software to install/update the
firmware can also be found on the web site. From there you should need only a standard USB (or
This error message indicates that the
voltage from the input power source/supply
is too high (above 36.0V).
This error message indicates that there is
a problem with the balance connector
connection and/or a significant imbalance.
This error message indicates that the
wrong battery type has been selected.
For example, you have a LiPo balance
connector connected in NiMH mode.
This error message indicates that the
battery is not connected and/or there is a
problem with the connection to the charger
This error message indicates that the
selected number of cells does not match
the cell count estimated by the charger.
These error messages indicate that the
battery voltage is too high or too low to be
charged/discharged with the chosen
settings. For example, if you have the CHG
End Voltage set below the current voltage
of the battery and attempt to charge.
