Thuli Tables The Junior Portable Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 20

Thuli Tables The Junior Portable Скачать руководство пользователя страница 12

12

DROP OPERATION AND TENSION SETTING

1. Advise your patient prior to setting the tension.

2. With the patient on the table, cock the drop section with an upward motion of the cocking lever. There must be sufficient

tension on the drop to hold the patient's head or body weight.

3. Decrease the tension control knob by turning it counter-clockwise until the section drops.

4. Increase the tension by turning the tension control knob clockwise 3-4 half turns. As a general rule, the drop is now

set for the patient's weight, which may vary according to the practitioner's preference.

STRAIGHT DROP

FORWARD MOTION DROP

Knob pulled out BEFORE cocking

Headpiece & Table Operation

12

MAXIMIZING FACIAL COMFORT

For patients sensitive to pressure on the eyes, slightly raise the

back end of the headpiece. This will take pressure off of the

eyes, supporting the weight of the head at the mandible and

zygomatic arches. This maneuver, in combination with slight

flexing of the headpiece, will provide optimal facial comfort for

some patients.

Knob pushed in BEFORE cocking

The drops on the headpiece and table have adjustable tension and cock with an upward movement of the cocking lever.

Following is a general guideline for setting the tension.

PRIOR to cocking the headpiece, set for straight drop by pulling

out the headpiece straight drop/forward motion knob until you

feel it is “set” into position. This will be just short of coming

into contact with the cocking bar. If you pull the knob out too

far, simply push it back in.

PRIOR to cocking the headpiece, set for forward motion drop

by pushing in the headpiece straight drop/forward motion knob.

Cock the headpiece with an upward motion on the headpiece cocking lever.

Please note: Be sure to change the headpiece drop function

before cocking the headpiece to prevent an ineffective drop and

damage to the drop mechanism.

Set the desired tension by turning the tension control knob clockwise (increasing tension) or counterclockwise (decreasing tension).

WEIGHTS FOR BACK LEGS

Place weights on the crosspiece of the back legs for counterbalance.

«
...
10
11
12
13
14
...
»

Содержание The Junior Portable





















Отзывы:

Нет отзывов