QUICK START GUIDE for:
HELIUM AERO
™ (2 BIKE CARRIER)
9042
, (3 BIKE CARRIER)
9043
DO
DO NOT
• Loosen locking knob
completely before inserting
stinger into hitch receiver.
• Make sure Auto Pin engages
into receiver hole (STEP 3).
Use knob to tighten. Lock.
• Load heaviest bike first–front
to the right
(STEP 8).
• Alternate bike direction.
• Secure bicycle to rack with
rubber straps and safety
strap through the frames and
around the mast of the rack
(STEPS 8-12).
• Check tightness of all bolts
and knobs periodically (every
6 months).
• Check rubber straps for wear
and replace if worn.
• Install on a trailer or other
towed vehicle.
• Put more than 2 bikes on a
class 1 hitch.
• Do not “overstretch” the
straps.
• Use the rack while traveling
on dirt roads.
• Use the rack to carry tandems
or recumbents.
• Put more than the intended
number of bikes on the rack.
5015950_01