5/6
PERSONALIZING AND SECURING YOUR WIFI NETWORK
You can modify the settings of the WiFi network transmitted by your WiFi USB key (change the SSID network
name, change the RF channel used or secure the connection) thanks to the FunAccess™ software, accessible
by simply double-clicking the FunAccess™ icon
located in your taskbar next to the Windows clock.
Please note that you will be notified each time a WiFi device connects to your network, by way of a helpful
“pop-up” message.
We also recommend that you read the full manual in PDF format available by clicking
Start - All Programs -
Thrustmaster - FunAccess
.
DECLARATION OF CONFORMITY
EUROPEAN USERS:
This equipment has been tested and found to comply with Directive 1999/5/CE of the European Parliament and of the Council on
radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. After assessment, the
equipment has been found to comply with the following standards: EN 300.328 (radio), EN 301 489-1, EN 301 489-17
(electromagnetic compatibility) and EN 60950 (safety). This equipment may be used in all European Union countries and in all
countries applying Directive 1999/5/CE, without restriction, with the exception of the following countries:
When this equipment is used outdoors, output power is limited to within the frequency bands listed below. For more information,
consult the ART website: www.art-telecom.fr.
Location
Frequency band (MHz)
Power (EIRP)
Indoor (no restrictions)
2400 – 2483.5
100mW (20dBm)
Outdoor
2400 – 2454
2454 - 2483.5
100mW (20dBm)
10mW (10dBm)
Operation of this equipment in a residential environment may give rise to radio interference; if so, it is incumbent upon the user to
rectify the situation.
ITALY:
This device complies with the National Radio Interface and the requirements of the Frequency Allocation Table. Use of this
wireless product outside of the boundaries of the owner’s property requires a general authorization. For more information, consult
the website www.comunicazioni.it.
CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
USA COMPLIANCE NOTICE: this
device complies
with
Part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC
rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be
determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of
the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.