Thrust Uav 250R PRO, Руководство пользователя

Страница: 25 / 28

25
USER GUIDE
TROUBLESHOOTING
1. The drone is not responding to radio controls.
• Check receiver wiring.
• Verify configuration in Betaflight.
• Consult your receiver user manual: FrSky XSR, FrSky X4R or Spektrum
• Refer to your radio user manual.
2. The drone crashed and needs new parts.
• Replacement parts can be purchased directly from the Thrust UAV website, including:
3. The goggles are not receiving video feed.
• Check the channel on the goggles. The default is set to 5740.
• Make sure the camera is plugged in.
• Check the battery percent power and charge if needed.
• Refer to your FPV goggle instruction manual.
4. The drone flies erratically.
• Check all screws and make sure the hardware is tight on each arm.
• Verify the sensor calibration.
• Inspect the ESC’s for prop marks or severed wires. ESC’s can be replaced if damaged.
• Inspect the motors. They should spin smoothly and can be replaced if damaged.
• Check the prop orientation.
5. The motors aren’t configured correctly.
The ESC’s can be reconfigured using Betafight and BLHeliSuite. A great tutorial is at https://oscarliang.com/
flash-esc-via-cleanflight-fc/
- Motors
- Speed controllers
- Arms or frame
- Skirts
- Flight controller
- Camera
- Antenna
- Missing screws or nuts