Hook Up | Community Table
6
Instructions
7
#8 x 7/8" Panhead
Continue to fasten the worksurface to
the frame using the small L brackets
and provided 7/8” Panhead screws.
The quantity of screws will depend on
the length and depth.
Use a power drill as there are no
pre-drilled holes for this step.
The Community Table Trough is an
optional addition, your table may not
include one.
Center the trough in the middle of the
table. Insert 4 screws in the 4 corners
to mark the position and then remove
the Trough. Assuming your table has
Power, you will want to install the
modules before fastening the trough
in place. Once installed, you can fully
fasten the Trough with the provided #8
x 3/4” Panhead screws.
Ensure you have the correct screws,
anything longer than 3/4" will damage
the top.
#8 x 3/4" Panhead
8
Содержание Hook Up Community Table
Страница 1: ...Hook Up Community Table ...
