three h Hook Up Community Table, Инструкция по эксплуатации

Страница: 5 / 7

Hook Up | Community Table 5
Instructions
A) Start by fastening the Stretcher to
the Legs using 2 M6x10mm screws.
B) Finish by fastening the Leg set up to
the Long Frames using 8 of the provided
m6x10mm screws.
5
Allen Key M6x10mm
Qty: 10
6
Place the Leg & Frame structure on the
worksurface. Use caution to not scratch
the surface.
Center the frame on the worksurface
and fasten the surface to the Leg
Brackets using the provided
#8 x 7/8” Panhead screws.
It is recommended to insert one screw
on each corner leg to start. Verify all leg
tubes are equal distance from surface
edges - then apply and tighten all
remaining screws.
Qty: 20
#8 x 7/8" Panhead
A
B