At Home & Small Office Essentials
31
2"
2"
Mark a vertical line 2" in from the
outside edge of the Top Rail on both
sides.
Place the anti-dislodgement cam
vertically in the top wall rail with the
flat side resting in the rail.
Align the top round notch of the cam
with the 2” mark from Step 3.
Make a mark/point using the provided
screws in the top round notch.
Do this to both sides.
Remove the Anti-dislodgement cam.
WALL MOUNT TACKBOARD
3
4
Note: Anti-dislodgement cams are required on
single wallboards and on the top tile of a multi-
tile wallboard stack (two or more wallboards
stacked vertically above each other).
