At Home & Small Office Essentials
11
Plug the main power supply into the
supply box. Keep the wire tied in the
twist tie until the next step.
Flip the desk, level the glides, left to
right then front to back. Plug the main
power source in. From here, please scan
the QR code or follow the link below
for instructions on how to initialize the
controller and other safety precautions.
UPSIDE TABLE DESK
5
6
bit.ly/2Fgmsjk
Always maintain a 1" gap (min.) between the
edges of the worksurface and adjacent objects
or structures.
Do not install underneath shelves or objects
attached to wall that could become dislodged by
the worksurface.
