Thrax Audio Spartacus 300, Руководство по эксплуатации

Страница: 5 / 9

Fit each tube into the matching socket firmly, noting the location of holes in the socket
and pins of the tubes, making sure that its pin pattern corresponds to the holes in the tube
socket.
When inserting and removing tubes, handle them by their bases, not by their glass bulbs.
WARNING : Do not allow anything to touch the tubes in normal operation - they become
very hot. Make sure to keep everyone, especially children and pets, away from the tubes
which become extremely hot and may cause serious injury. Never touch a tube if the
glass is broken. The internal structures carry high voltage and could present a serious,
possibly lethal shock. If a tube breaks, unplug the amplifier and wait 30 minutes, then
remove the tube. Keep flammable objects away from the amplifier.
Unpacking
All Thrax Audio shipping boxes have been specially designed to protect their contents
and special care has been taken to prevent damage under normal shipping conditions.
Mishandling should be evident upon inspection of the shipping container. Carefully
remove your new component from its packing and examine it closely for signs of shipping
damage. We strongly recommend saving all original packing to protect your
component from damage should you wish to store it or ship it at a later date.
Spartacus is shipped with protective polyethylene foam around the tubes. You will need
a 2.5mm hex key to remove the top panel and foam - make sure all the tubes are firmly in
place before replacing the panel.
UNPACKING AND INSTALLATION
5
Step 1 : Take the top panel off
Step 2 : Remove protective foam
Step 3 : Make sure tubes are firmly in place