7
Replacement Sensor Cable (Model T9385M)
Thought Technology sensors use a highly flexible and lightweight
cable. If, for any reason, a break should occur in the cable, a
replacement cable is available.
Model No.SA9385M
To change cables, tightly grip the connector plugged into the
MyoScan with your thumb and index, and pull gently on the
connector. Do the same at the other end to remove the cable from
the encoder. Replace the cable with a new one.
Be very careful to align the notch on the cable connector with the
guiding groove on the sensor head or the encoder, since the plug
will align in only one direction. (See figure 5.)
Guiding Notch and Groove
Fig. 5 Cable Connectors
