Thought Technology MYOTRAC INFINITI, Руководство пользователя

Страница: 16 / 57

MyoTrac Infiniti
™
User Guide
16
Note: exact power supply subject to change without notice.
Internal Charger
If your MyoTrac Infiniti was supplied with a wall mounted AC adapter it is possible to charge the
battery pack while it is inserted in the device.
Note: Only use Thought Technology Ltd supplied wall mounted chargers with this device. Failure
to do so could result in potential injury. Use only GlobTek Part Number WR92B2500LCP-Y-MED
To start the charging plug in either the wall mounted AC adaptor or the USB cable. A full charging
cycle from fully empty to fully charged will take approximately 2hrs for AC adaptor and 5.5hrs for
the USB cable. The unit can be used while plugged in to either power source. The charging cycle
does not need to be completed in full; it can be stopped at anytime by removing the connector.
When the unit is turned off while plugged into an external power source, the screen displays a
battery symbol. Charging action is shown with an animation of the battery filling up. When the
battery is fully charged, the symbol shows a full battery.
If the unit is plugged into an external power source while it is turned off, it will start charging within
one minute.
The state of the battery charging is available by going to the power menu in the settings menu of
the device. It indicates the current mode of power and whether the unit is currently charging the
batteries.
Note : The rechargeable batteries must be fully charged prior to initial use. In order for the batteries
to reach full capacity it may be necessary to charge them several times (~2-8) after initial use.
Memory
Recorded data can be saved using three methods - choose the one which most closely matches
your usage needs. To select saving method, select the
Settings menu from the main menu, and
tap on the Save icon. Note data can only be recorded from EMG sessions not from Stim sessions.

Internal Memory
– Limited size, only the statistical summaries are recorded. Specifically, the
statistics for 13 open sessions or 9 training sessions (work/rest) or 6 assessment sessions
(work/rest + fast-flick + endurance) can be recorded. Data can be lost if the batteries are
removed from the unit for longer than a few minutes.

Compact Flash Card
– Most flexible method of data saving: save all the raw data for review
on the encoder or for download to the PC. Available in most electronics stores in a range of
memory sizes. Since all EMG data is recorded, the amount of data that is saved to the
compact flash card depends on the size of the card:
64MB 1.75 hours
128MB 3.5 hours
256MB 7 hours
512MB 14 hours
1GB
27.5 hours
2GB 55.5 hours
The encoder is delivered with a protective insert in the compact flash slot. To remove it, push
the button next to the slot once to eject the card. The CF card can then be inserted; you will