THORLABS WFS20-14AR, Руководство по эксплуатации

Страница: 143 / 153

© 2007 - 2018 Thorlabs
8 Appendix
141
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
·
Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and receiver.
·
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
·
Consult the dealer or an experienced radio/T.V. technician for help.
Users that change or modify the product described in this manual in a way not expressly ap-
proved by Thorlabs (party responsible for compliance) could void the user’s authority to operate
the equipment.
Thorlabs GmbH is not responsible for any radio television interference caused by modifications
of this equipment or the substitution or attachment of connecting cables and equipment other
than those specified by Thorlabs. The correction of interference caused by such unauthorized
modification, substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all op-
tional peripheral or host devices. Failure to do so may violate FCC and ICES rules.
Attention
Mobile telephones, cellular phones or other radio transmitters are not to be used within the
range of three meters of this unit since the electromagnetic field intensity may then exceed the
maximum allowed disturbance values according to IEC 61326-1.
This product has been tested and found to comply with the limits according to IEC 61326-1 for
using connection cables shorter than 3 meters (9.8 feet).
Warning
Be careful when working with open laser beams. Follow the relevant laser safety regulations,
avoid skin irradiation and use laser protection glasses to protect your eyes!
Be sure to pay strict attention to the safety recommendations of the appropriate laser safety
class, as stated for the used light source.