THORLABS WFS20-14AR, Руководство по эксплуатации

Страница: 24 / 153

© 2007 - 2018 Thorlabs 22
Wavefront Sensor
5.2.1 Menu Bar
5.2.1.1 File Menu
The actual settings of the WFS GUI including configurations of
the graphical displays and the instrument setup are automati-
cally saved when exiting the program. The next time the Wave-
front Sensor software is run, the most recent settings are auto-
matically loaded.
Additionally, the complete instrument and GUI settings can be
saved to a configuration file. The application software can load
this file to restore previous measurement conditions.
·
Open Setup ... opens a Wavefront Sensor configuration file
(*.cfg) stored with this application (see below). This configuration
file contains instrument settings (camera, pupil, wavefront) as
well as display and graphical settings.
·
Save Setup As ... stores a Wavefront Sensor configuration file (*.cfg) containing all instru-
ment settings (camera, pupil, wavefront) as well as display and graphical settings. Assign a
meaningful individual name to the configuration file.
·
Save Spotfield Image Raw... saves the Spotfield Display as a *.bmp image with the size
of the selected camera resolution.
·
Save Spotfield Image... saves the Spotfield Display as a *.bmp image with the size as dis-
played in the software.
·
Measurement File Preferences opens a dialog to set the attributes of the measurement data
file:
Separation character : select the separator between two subsequent data val-
ues within a line. Default: "Comma".
Decimal character : This choice is important to ensure compatibility with the Re-
gion and Language settings of the computer where the saved measurement
data shall be processed. Default: "Point".
If the option 'Omit Header Data' is enabled the entire header including the listing of single
wavefront and Zernike fit results is omitted and only the pure data array is saved. This option is
helpful when you want to process the measured wavefront data, e.g. in Microsoft Excel
â
.
53