THORLABS WFS Series Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 157

THORLABS WFS Series Скачать руководство пользователя страница 52

© 2007-2012 Thorlabs GmbH

49

Operating Instruction

NOTE

On occurrence of serious Wavefront Sensor errors the continuous measurement will
stop automatically and you will be asked to change settings and to re-start the
continuous measurement again.

4. Calibration

The following pull down menu occurs:

There are two different ways to perform a User Calibration of the Wavefront Sensor.
See chapter

User Calibration

for a detailed description.

5. Display

See the following chapters for a detailed description of the interchangeable
graphical displays. Alternatively click on the tabs below the graphics to see the
desired one.

6. Help

The following pull down menu occurs:

Contents

This opens the Wavefront Sensor help file. It contains the same information as the
manual but enables the advantage to search for key words.

Visit the Thorlabs Website

You were directed to the Thorlabs website at

www.thorlabs.com

that contains

information about new software releases or related products.

View License Agreement

The Thorlabs End-User License Agreement you agreed with is displayed.

About

Shows you the actual software release versions, the Instrument Name and Serial
Number of the used device.

95

«
...
50
51
52
53
54
...
»

Содержание WFS Series






























































































































































Отзывы:

Нет отзывов