THORLABS Vytran LDC401, Руководство пользователя

Страница: 32 / 62

LDC401 & LDC401A Automated Cleavers Chapter 9: Controlling the LDC401 and LDC401A
Page 28 TTN100064-D02
In the edit / viewing screen, touch the value to enable the On-Screen-Keyboard and edit the value. Touch

or X to
return to the Parameter Select Screen.
Figure 30 Parameter Edit Screen
The parameter list indicates that an item has been changed by displaying a different icon .
The User must select

when leaving the Parameter Select Screen in order for all changes to be committed to the
LDC. Changing the FHB offset will require the motor to be re-homed after uploading. The controller will ask if it’s
“ok to home?”. Be sure that there is no fiber clamped in the machine or any other obstruction that may cause the
system to fail this move.
9.1.1. Cleave Screen
Once the cleave sequence has started (either by pressing ‘Start’ on the Tablet, on the LDC401 or by opening the
left FHB lid), the Cleave Screen is displayed. This screen updates dynamically as the cleave sequence progresses.
A typical sequence consists of loading the fiber, pulling tension, cleaving the fiber then unloading (although the user
can go straight to the tension stage by pressing start when the left FHB lid is closed).
Figure 31 Cleave Screen – Load Fiber