THORLABS TLV-U-FF, Руководство пользователя

Страница: 6 / 11

Filter Cube Assembly Chapter 2: Assembly Instructions
Page 4 TTN013161-D02
2.4. Step 4
Place the dichroic mirror in the emission filter half’s slot. The surface of the
dichroic mirror with the beamsplitter coating must face
UP .
Figure 5 The dichroic mirror is inserted into the emission filter half.
2.5. Step 5
Align the excitation filter half with the notch on the emission filter half as shown in
Figure 6. Alternate tightening between the two assembly screws taking care not
to allow movement of the dichroic mirror.
Check the orientation of the dichroic mirror by looking into the excitation and
emission sides of the filter cube. The reflective (beamsplitter-coated) side should
be visible through the excitation side of the cube.
Figure 6 Reassembling the Filter Cube and Checking Dichroic Mirror Orientation
Excitation
Filter Half
Emission
Filter Half
Emission
Filter Half
Dichroic Mirror
(Beamsplitter-
Coated Side Must
Face Up)
Emission
Side
Excitation
Side
(Coated)